# url : http://www.rdrs.net/document/
# date: Wed Feb  9, 2005
# taken from the 510 usersguide which can be found at:
# http://www.speedtouch.com/prod510.htm
#
# www.xs4all.nl
# http://www.xs4all.nl/helpdesk/abonnement/adsl/thomson/ethernet/index.html
#

How to perform a hardware reset to factory defaults

Proceed as follows:
 1. Make sure the SpeedTouch is powered on.
 2. Power off the SpeedTouch by pressing the power button until all LEDs turn off.
 3. Press the power button once again (shortly).
 4. As soon as the Power/System LED is flashing green, press the power button once
    more (shortly).
 5. The Power/System LED stops flashing to become solid green. After six seconds, it
    starts flashing green again. Press the power button once more (shortly).
 6. All LEDs flash green once.
 7. The SpeedTouch reboots and will come online with factory default settings.
    Resetting the system to its factory defaults also involves deleting the 
    configuration profile settings. You may, therefore, need to reconfigure the 
    system using the SpeedTouch Setup wizard or by uploading the relevant 
    configuration file. See 1.3 SpeedTouch Configuration Setup on page 19 for 
    more information.

#
# Note: 
#  If you find yourself in the Netherlands and your connection is [fully] offline
#  and discconeccted for at least 30 Minutes, KPN will automaticly reset your connection.
#